Air conditioning is one of the most important aspects of home comfort. It can be frustrating and expensive to repair if you have an old, broken or malfunctioning air conditioner. Fortunately, there are many easy ways to fix a broken air conditioner at home. You may even find that your air conditioner has been repaired for free by friends, neighbours and community groups who want to help out. Fixing a broken air conditioner is not difficult when you know how to do it. The following eight steps will show you how to get started:
1. Check Your Diagnosis
Before you start trying to fix your air conditioner, make sure you understand what's wrong with it. This will save time and money because you won't need to buy parts if they don't work.
2. Make Sure It's Not Leaking Water
Check the drain pan first if you think your air conditioner might be leaking water. If it's full of water, then you'll need to replace the drain pan before you try to fix anything else.
3. Remove Parts from the Unit
Remove all the screws on the back panel of your air conditioner. Then remove the fan assembly, condenser coils, compressor and other components as needed.
4. Clean Out the Condenser Coils
Clean off the condenser coils using a wire brush and some soapy water. Make sure you clean them thoroughly, especially around the fins where dust collects.
5. Replace the Drain Pan
Replace the drain pan with a new one. You can use the same type of pan you had originally, but you should probably purchase a new one if it leaks.
6. Reassemble the Unit
Put everything back together just like you took it apart. Use only the original fasteners and tighten each screw until it stops moving.
7. Test the System
After you've reassembled your Unit, test it by running the blower motor. If it runs smoothly, you're done!
8. Call a Professional
If you still aren't satisfied with the results, call a professional HVAC technician to inspect your system. They can usually diagnose problems more accurately than you can.
Why should you need to repair a broken air conditioner?
It is very common for people to face this problem. There are various reasons you may need to repair a broken air conditioner. Some of these reasons include:
• When the cooling system isn't working properly, it could cause damage to your house. For example, if the temperature inside your home is too high, the air conditioner will struggle to keep it cool enough.
• A faulty air conditioner could also lead to mold growth. Mold can grow quickly indoors without proper ventilation.
• A damaged air conditioner could also result in higher electricity bills.
• An air conditioner that doesn't work correctly could cost you thousands of dollars over its lifetime.
• A broken air conditioner could also make you vulnerable to severe weather conditions like heat waves and hurricanes.
How to fix broken air conditioning?
There are different methods available for repairing a broken air conditioner, depending on the age of the machine. However, here we will discuss the easiest way to repair broken air conditioning.
The first step is to check whether your air conditioner is broken or not. To do this, you must follow the below-mentioned instructions.
Check the circuit breaker. This is located near the fuse box. If any of the breakers are tripped, there is a short circuit somewhere in the electrical wiring. Contact an electrician.
- Check the power supply. Turn on the switch at the wall socket. The power light should come on immediately. If it does not, there is no power supply. In this case, contact an electrician.
- Check the fuse box. Open the cover of the fuse box. If the fuses are blown, they should be replaced.
Check the compressor. If the compressor is not turning on, then there is something wrong with the compressor itself. It needs to be repaired.
We offer free estimates, no-obligation quotes and same-day service. We guarantee 100% satisfaction! Click here and visit us today for a free quote!